BMC Syllabus 2019-20 | MCGM JE (Civil/Mechanical/Electrical) Exam Pattern

BMC JE Syllabus 2019-2020 MCGM Junior Engineer Exam Pattern for Civil/Mechanical/Electrical Engineering @mcgm.gov.in: Municipal Corporation of Greater Mumbai – Brihanmumbai Municipal Corporation set to conduct written Test for Junior Engineer Recruitment Test for (Civil/Mechanical/Electrical). In the coming months of 2020 Year officials will conduct Written Test for selecting final aspirants for the Post of BMC JE 2019-2020. If you are the right applicant who have filled up online application form for this Recruitment Test – then you should download complete online available BMC Syllabus 2019 along with Exam Pattern of this Junior Engineer Exam.

BMC Syllabus 2019

MCGM Syllabus 2019-20 for Junior Engineer Written Test we have provided on this Page. Candidates can check and download online freely available BMC JE Syllabus 2019-2020 for Civil/Mechanical/Electrical Engineering Posts. Topic Wise detailed Exam Syllabus provided on this Page. Simply check and download online BMC Junior Engineer Syllabus 2019 in English Language we have provided on this Page.

Selection Process:

  1. Written Examination for Objective Types
  2. Skill Test or Interview
  3. Certificate Verification

Selection of best candidate for this BMC Junior Engineer Notification will be based on the Written Test, Skill Test or Interview and Certificate Verification Process. In the 1st Phase of Selection, each and every applicant has to appear in the written Examination which will conduct by the IBPS Panel for Municipal Corporation of Greater Mumbai – Brihanmumbai Municipal Corporation.

BMC Syllabus 2019-2020
BMC JE Syllabus 2019-2020

There are total numbers of 243 Seats for Junior Engineer Civil and rest 98 seats are allotted to Junior Engineer Electrical/Mechanical Engineering. This is expected that more than Lakhs of applicants are all set to appear in this Written Test which will conduct by the Municipal Corporation of Greater Mumbai – Brihanmumbai Municipal Corporation. Hence, each and every applicant should prepare themselves for the written Exam by downloading complete Exam Syllabus & Paper Pattern. Simply check detailed Exam Syllabus/Paper Pattern we have provided here on this Page below here.

MCGM Syllabus 2019

(Paper Scheme)

BMC JE Paper Information:
Sr. No. Parameters Details
1.         Exam Name BMC Junior Engineer Written Exam 2019-2020
2.         Paper Language English/Hindi
3.         Marking Scheme 1 Mark for Every Correct Answer
4.         Examination Timing Morning/ Evening
5.         Subjects Intelligence Test, General Knowledge and Technical Knowledge
6.         Date of Exam Expected in Jan 2020
7.         Negative Marking Applicable
8.         Location of Exam Maharashtra State, India
9.         Duration of Exam 90 Minutes (1.30 Hour)
10.     Mode of Exam Online
11.     Type of Test Pen and Paper Based
12.     Questions Type Objective Type (M.C.Q’s)
13.     Total Questions 100 Questions
14.     Total Marks of Paper 100 Marks

(Exam Pattern)

Subject/Topic Name Questions by Topic Wise Marks by Topic Wise
Intelligence Test 20 Questions 20 Marks
General Knowledge 20 Questions 20 Marks
Technical Knowledge 60 Questions 60 Marks
Total 100 Questions 100 Marks

BMC JE Syllabus 2019

After checking Paper Scheme and Exam Pattern for this BMC Junior Engineer Written Exam 2019-2020, Simply check detailed BMC JE Syllabus 2019 for Intelligence Test, General Knowledge and Technical Knowledge Topics from below here.

(BMC JE Syllabus 2019 for General Awareness)

  • Economy, Banking, and Finance
  • Scientific Research
  • Important Financial & Economic News
  • Culture
  • Capital
  • Knowledge of Current Events
  • Geography
  • Indian Constitution
  • General Politics
  • Sports-Athlete such as essential knowledge
  • Economy
  • Budget and Five Year Plans
  • Science – Inventions & Discoveries
  • India and its neighboring countries
  • Scientific progress development
  • India and its neighboring countries
  • Scientific progress development
  • Geography
  • Indian Constitution
  • History
  • National & International Awards
  • Currency
  • Countries & Capitals
  • Important Financial & Economic News
  • Culture
  • Science – Inventions & Discoveries
  • Economy, Banking, and Finance
  • Books
  • Indian Languages
  • Capital
  • Knowledge of Current Events
  • General Politics
  • General knowledge
  • Current Affairs – National & International Script

BMC Exam Syllabus 2019

(MCGM JE Mechanical Electrical Engineering Syllabus 2019)

  • Basics of Mechanical Engineering: Concept of mechanical technology – Milling, planning, shaping, drilling, reaming, grinding, riveting, welding and joining process – types, defects. Super finishing processes – Honing, lapping, buffing, Casting, forging, rolling, drawing, forming processes Classification, Selection and application of Machine Tools, Cutting tool material. Coolants, Design of cutting tools or Tool design.
  • Theory of Machines: Fundamentals and type of Mechanism, Simple machines, Belt Drives, Gear Drives, Joints and Coupling, single and multi cylinder engines and v engines, belt and chain drives, degree of freedom.
  • Machine Design Concepts: Torson, Spring, Joints, Bearing – types and Design, Theory of Failure, Factor of Safety, Combined stresses, Threaded and welded joints, design of screw and bolts, Design of Shafts and Springs, Keys, Basics of CNC machines
  • Environmental Studies: Natural resources and associated problems, Environmental pollution, Environment and Social issues, Renewable energy sources, Concepts of Solar energy, Energy audit, Environmental protection Act
  • Strength of material: Properties of Liquids, Properties of Solids, Thermal properties of Matter, Basic of Electrochemistry, Metals and alloys, Basic of Non metallic Engineering materials, Thermocouple, Basic of fuels, lubricants etc. Simple stresses and strains, Direct and Bending stresses etc., Torsion, Trusses and Trough, Shear Stress, Torsion, bending moment and shear force concept
  • Fluid Mechanics: Pumps, Types and Selection, Efficiency, Characteristics etc., Compressible fluid flow, Fluid properties, pressure, Thrust, Buoyancy, Viscosity, Bernoulli’s theorem, Hydraulic jump, non-uniform flow, Reynolds’s number, hydraulic gradient, water hammer.
  • Manufacturing planning and Control: Manufacturing planning and control system, Forecasting, Planning Function, Planning for Material Requirements, project management, Industrial safety and Legislative acts
  • IC engines: Volumetric and thermal efficiency, SI engines, CI engines, Combustion, Knocking, Supercharging, cooling lubrication and ignition system.
  • Refrigeration and Air Conditioning: Thermal Engineering – Ton of refrigeration, concept of latent heat, evaporation concept, Heat transfer Thermodynamics – Law of thermodynamics, Ideal Gasses, Various Refrigeration Cycles Design of Refrigeration system – Compressor, Expansion unit, Accumulator, Evaporator, Condenser, Basic of Duct design, Vapour Absorption and Compression Refrigeration system Design of Air Conditioning system – Types of system- Window, split, centralized., Cooling tower etc. Latest refrigeration and their examples.
  • Parts of Vehicles: Engine, Chassis, Transmission, drive assembly, alternator, axle, body, wheels, brakes, steering, suspension etc., Components of Transmission system and their functions, Recent trends in Auto mobiles
  • Concept of SI and CI Engines: Carnot cycle, Reverse Carnot cycle, Otto cycle, Diesel cycle, SI Vs CI Engine
  • Efficiency: Thermal, Volumetric, Mechanical, Electrical system etc.
  • Electrical Fundamentals: Supply voltage, AC and DC Supply, voltage, current, inductance, resistance, capacitance, 3 phase and 1 phase supply system, electrical power, electrical energy, hv/ Iv supply, active and reactive power transfer and distribution, Reactive power consumption, Basics of Nanotechnology, Power factor improvement, Energy conservation methods
  • Electrical power transmission & distribution: Substation & receiving station, earthling, substation equipment, Bus Bar, CT, PT, Protection relay numerical / digital, circuit breaker, on load isolator, offload isolator, Surge arrestor, system grounding, equipment grounding, lightening protection etc. IS 3043, Single line diagram, control circuit, Various types of power plants.
  • Insulating material: Classification, dielectric strength, test & section (Bakelite, FRP, Teflon, PVC, HDPE, Mica, SF6, Vacuum and Oil etc).
  • Electrical systems: Electrification of residential installation, Electrification of Commercial installation, Electrification of Industrial installation
  • Measurement and Control: Basics of Measurement of Pressure, Temperature, Flow displacement etc.
  • Electric Motors (Induction Motors): Principle of working, 3 phase, 1 phase motors, motor starting methods, selection rating, cooling and enclosures, HV/LV motors, Motor protection relay, Motor control circuits, IS325, speed control methods-V/F control, slip recovery scheme, pole changing, construction of induction motors and their applications for pump, compressor, crane, actuator, tools, Maintenance & testing.
  • Cables and wires: Types, construction, HV/LV cables, testing, fault finding, cable rating and selection, cable jointing, termination.
  • Statutory requirement of electric installation: safety precautions, safety equipment and test instrument, Indian Electricity Rules 1956: provisions, IEEE, IEC, ESSA, Factory act, Workman compensation act, Minimum wages act
  • Illumination (Light): Types of light, solar lighting, LED, CLF, HPSV, Mercury lamp, tube light etc
  • Principles of Digital Instruments: Working principles of digital Voltmeter, Ammeter, Frequency meter, multimeters, Measurement of Resistance Megger Earth Test Potentiometer.
  • Power Electronics: SCR MOSFET, FET devices, rectifiers and inverter, SMPS, PWM convertor, application, Power amplifier
  • Batteries and UPS
  • Electrical protection: MCCB, ELCB etc
  • Provision of National Building Codes on Building services & ventilation, electrical & allied installation, air conditioning, ventilation, acoustic, sound insulation and noise control, installation of lifts and escalators.
  • Concepts of Electronics: Diode, Triode, Semiconductor, Forward bias, Reverse bias, Transistor – NPN, PNP. Analog circuits, Digital circuits.
  • Digital Electronics: Logic Gates, De’Morgans Theorem, Boolean Logic, Counter, Adder, Flip flops and types
  • PLC concepts: Basic of Ladder logic, Programming, architecture, Concept of Nano PLC
  • SCADA: Concept, Hardware, Software etc.
  • Automation: Timer, Sequencing, Logic
  • Network Design: LAN, MAN, WAN, Topology – Ring, Star, Bus.
  • Data Transmission: Single, Half duplex, Full duplex, Fiber optic concept
  • Computer Integrated Manufacturing and Technology Driven practices
  • Enterprise Resource Planning
  • Computers in Industrial Engineering
  • Internet vs Intranet

BMC Junior Engineer Syllabus 2019 Pdf

(BMC JE Civil Syllabus 2019)

  • Building Construction & Materials: Properties of wet and hardened concrete, tests on concrete, factors affecting strength of concrete, water-cement ratio, aggregate-cement ratio, mix design, additives, design of form work and types of formwork. Stones, bricks, cements, lime, mortar, timber, plastic, concrete, steel, paints and varnishes. Principles of building planning and design, integrated approach, building byelaws, building services such as vertical transportation, water supply sanitation, thermal ventilation, lighting, acoustics, fire protection, electrical fittings. Foundations, stones, brick and block masonry, steel and reinforced cement concrete structures, floors, doors and windows, roofs, finishing works, water proofing.
  • Engineering Mechanics: Simple Machines, Force System, Computation of Forces, Equilibrium, Friction, Centroid & Centre of Gravity
  • Strength of materials: stresses, strains, bending moments, shear forces and torsion theory, bending theory of beam, deflection of beam, theories of buckling of columns.
  • Theory of structures: Analysis of beams, frames and trusses, slope deflection method, moment distribution method
  • Steel structures: Design of bolted and welded connections, columns, footings, trusses, steel beams
  • Design of reinforced concrete structures (limit state): Design of slab, beam, columns, footing, retaining walls, tanks, building frames, staircases
  • Construction planning and Management: Elements of scientific management, elements of material management, safety engineering, network analysis, construction equipment, site layout, quality control
  • Surveying: Classification of surveys, measurement of distances-direct and indirect methods, optical and eletronic devices, prismatic compass, local attraction; plane table surveying, levelling, calculations of volumes, contours, theodolite, theodolite traversing, omitted measurements, trigonometric levelling, tacheometry, curves, photogrammetry, geodetic surveying, hydrographic surveying
  • Estimating, costing and Valuation: Specification, estimation, costing, tenders and contracts, rate analysis, valuation
  • Geo-technical Engineering: Geotechnical properties, stresses in soil, shear resistance, compaction, consolidation and earth pressure, stability of slopes, bearing capacity, settlements, shallow and deep foundations, cofferdams, ground water control.
  • Highway Engineering: Planning of highway systems, alignment and geometric design, horizontal and vertical curves, grade separation, materials and different surfaces and maintenance, rigid and flexible pavement, traffic engineering
  • Bridge Engineering: Selection of site, types of bridges, discharge, waterway, spans, afflux, scour, standards, specifications, loads and forces, erection of superstructure, strengthening

MCGM JE Exam Syllabus 2019

Environmental Engineering:

  • Water Supply Engineering: Sources of supply, design of intakes, estimation of demand, water quality standards, primary and secondary treatment, maintenance of treatment units, conveyance and distribution of treated water, rural water supply.
  • Waste water Engineering & Pollution control: Quantity, collection and conveyance and quality, disposal, design of sewer and sewerage systems, pumping, characteristics of sewage and its treatment, rural sanitation, sources and affects of air and noise pollution, monitoring, standards.
  • Solid Waste Management: Sources, classification, collection and disposal

To download pdf Exam Syllabus in pdf format you need to click on the link below provided here and download now online detailed BMC Junior Engineer Syllabus 2019-2020 Pdf.

Recruitment Details BMC Recruitment
Syllabus Pdf Link

Leave A Reply

Your email address will not be published.